COATS® X-Series - Build Your Tire Changer Your Way

1. Choose A Platform: With Robo Assist Or Without
- The COATS patented Robo-Arm® is a powerful helper device with 28" of reach and a full 18" of automated vertical stroke.

2. Choose Your Motor: Air Powered Or Electric
- Air powered drives offer up to 1.5 HP (dependent on air supply), meaning more power and speed, control.
- Electric drives are always 1HP and do not need a larger compressor; they’re quieter too.

3. Choose Your Bead Loosener: Hand Operated Or Foot Pedal
- Traditional foot pedal operation.
- COATS advanced hand operation with Power In, Power Out & Stop In Place gives the operator total control and a better view.

  • Advanced clamp positioning allows for greater control when clamping wheels. Position clamps exactly where needed at any point between fully in and fully out. No need to wait for the clamps to have to cycle the full range.
  • Direct oil-injection system more effectively distributes oil to the moving components, ensuring better lubrication to reduce wear and lengthen life expectancy. Designed to prevent oil from being wasted during tire inflation. Container holds 180 fluid ounces, more than a year’s worth of oil for most shops, significantly reducing the need for regular replenishment.
  • Robo-Arm®-ready tower comes standard on all models for easier future Robo-Arm® upgrade on 50X models.
  • Durable plastic chassis storage tray keeps your tools right where you need them. Helps keep your work area neat and organized.
Operation1st loosen bead, 2nd mount/demount
Wheel HandledAlloy & Steel, Car & Lt Truck
Mount DemountSwing arm
Tool head OffsetManual
Table ShapeX shaped
Wheel Clamping MethodFour clamps, air cylinder operated
Height of Table to Floor27"
Bead Loosening SystemPedal actuated
Bead Lifting SystemTire Bar
Air Drive System50XA** 1.5HP Air Motor, 110-175psi, 15scfm
Electric Drive System50XE** 1HP Electric Motor, 110v, 60hz, 15amp
Inflation Pressure ControlLimiter
Assist Arms/Tools50X**3 Duckhead Roller; All 50X include upper support for optional Robo-Arm
Wheel LiftOptional
Clamping pressure limitedNone
Clamps50X**1 Steel; 50X**2&3 Grip Max
Bead Seating ReservoirVertical 3.8 Gal. in Tower.
Inflation Gauge60 psi
Air Supply Gauge0-300psi
Water Filter/Lubricator or Oil InjectorOil Injector
Storage TrayPlastic tray on chassis; 50X**3 adds metal side cabinet
Inflation GuardOptional
  
Min / Max Rim Diameter6"-22" external, 8"-24" internal (car & light truck only)
Max. Rim Width14"
Max Tire Diameter50"
Rotation SpeedElectric = 1 speed, Air = Variable
Chassis Footprint49"w x 48"d x 84"h (76"h-shipping)
Recommended Work Area7' x 6'

Coats Baseline BL200

  • For steel and alloy wheels
  • Electric 1.0 hp motor
  • Air powered side bead loosener
  • X-shaped tabletop
  • Includes bead sealing jets to aid in inflation
  • Clamping capability up to 21” externally
  • Access to Coats’ extensive Factory Authorized service network
  • Assembled in the USA
  • 6 Month Parts Only Warranty

 

Operation1st loosen bead, 2nd mount/demount
Wheel HandledAlloy & Steel, Car & Lt Truck
Mount DemountSwing arm
Tool head OffsetManual
Table ShapeX shaped
Wheel Clamping MethodFour clamps, air cylinder operated
Bead Loosening SystemFoot Controlled, air cylinder
Bead Lifting SystemTire Bar
Electric Drive System1HP Electric Motor, 110v, 60hz, 15amp
Inflation Pressure ControlRegulator
Filter/Lub or Oil InjOil Injector
Min / Max Rim Diameter11"-21" external, 13"-23" internal
Max. Rim Width10"
Max Tire Diameter38"
Rotation SpeedElectric = 1 speed
Chassis Footprint50"w x 42"d x 73"h
Recommended Work Area6' x 5'

Coats APX80

  • Large clamping capacity to externally clamp wheels up to 30 inches or as small as 9 inches in diameter to maximize service flexibility.
  • High-torque electric turntable gives you the power you need for tough applications.
  • Three-position hand-operated bead-loosener provides complete control, reducing wait time and minimizing risk of wheel damage.
  • Duckhead® roller prevents top bead from flipping over Duckhead® mount head on large, stiff sidewall tires.
  • Robo-Arm® helper device applies pressure to create bead lock and hold top bead in drop center when mounting.
  • Horizontal power rollers allow easy bead and rim lubrication, loosen top beads, and assist in mounting run-flat and low-profile tires.
  • Ergonomically positioned foot pedals and helper controls located at point of use minimize training and opportunities for error.
Operation2 HP compressor, 110 to 175 PSI, 15 SCFM @ 150 PSI for Air Model / 2 HP compressor, 110 to 175 PSI, 5 SCFM @ 150 PSI for Electric Model
Wheel HandledSteel, alloy, and high-performance
Tool head OffsetPneumatic lift, set back, and lock, 18" Clearance Duckhead to Clamps
Table Shape"X" shaped for rigid perimeter support of the wheel
Wheel Clamping MethodFour self-cleaning and self-centering clamps in tabletop actuated by two pneumatic cylinders
Bead Loosening SystemHand actuated 8" dual action cylider for wheels up to 16" wide
Air Drive System110 to 175 PSI 2 HP compressor, 5 SCFM @ 150 PSI (for Electric Model), 15 SCFM @ 150 PSI (for Air Drive Model)
Electric Drive System2 HP high-torque, 110v, single phase, 25 amp
Bead Seating Reservoir5.7 gal separate tank, pressure protected
Inflation GaugeEasily calibrated 0 to 60 PSI gauge with protection to 200 PSI, Damage resistant Lexan faceplate
Water Filter/Lubricator or Oil InjectorStandard with atuomatic drain and large capacity lubricator bowl
Min / Max Rim Diameter9" to 30" External / 11" to 32" Internal
Max. Rim Width16"
Max Tire Diameter44"
Chassis Footprint90" x 85"

Coats APX90

  • Large clamping capacity to externally clamp wheels up to 30 inches or as small as 9 inches in diameter to maximize service flexibility.
  • High-torque electric turntable gives you the power you need for tough applications.
  • Three-position hand-operated bead-loosener provides complete control, reducing wait time and minimizing risk of wheel damage.
  • Duckhead® roller prevents top bead from flipping over Duckhead® mount head on large, stiff sidewall tires.
  • Robo-Arm® helper device applies pressure to create bead lock and hold top bead in drop center when mounting.
  • Horizontal power rollers allow easy bead and rim lubrication, loosen top beads, and assist in mounting run-flat and low-profile tires.
  • Ergonomically positioned foot pedals and helper controls located at point of use minimize training and opportunities for error.
  • Built-in wheel lift raises heavy wheels to tabletop height, reducing operator effort and the risk of wheel damage while improving control.
  • The Robo-Roller® comes installed, and it is used on the toughest of tires to help keep the following bead in the drop center.
Operation1st loosen bead, 2nd mount/demount
Wheel HandledAlloy & Steel, Car & Lt Truck
Mount DemountTilt Back
Tool head OffsetAutomatic
Table ShapeX shaped
Wheel Clamping MethodFour clamps, air cylinder operated
Height of Table to Floor27"
Bead Loosening SystemPower in, out & freeze Hand Controlled air cylinder
Bead Lifting SystemTire Bar 1st bead, roller second
Air Drive System1.5HP Air Motor (A version) 110-175psi, 15scfm
Electric Drive System2HP Electric Motor, 110v, 60hz, 30amp (110-175psi, 5scfm required for cylinders)
Inflation Pressure ControlLimiter
Assist Arms/Tools4 Powered
Wheel LiftStandard
Clamping pressure limitedNone
ClampsGrip-Max®
Bead Seating Reservoir5.7Gal. Tank
Inflation Gauge60 psi
Air Supply Gauge0-300psi
Water Filter/Lubricator or Oil InjectorFilter/Lube
Storage TrayNone
Inflation GuardN/A
Standard ProtectorsNylon head, steel head inserts, beadloosener & tool covers, Grip-Max® clamps
Min / Max Rim Diameter9"-30 external, 11"-32" internal (car & light truck only)
Max. Rim Width16"
Max Tire Diameter44"
Rotation SpeedElectric = 1 speed, Air = Variable
Chassis Footprint90"w x 102"d x 89"h
Recommended Work Area7' x 10'

Coats 4050 Center Post

  • For steel wheels or separating rubber from alloy for scrap.
  • Fast and efficient operation.
  • Versatile enough to handle a variety of tire and rim combinations.
  • Proven durability through years of use.
  • A good choice for high-volume shops that service steel passenger and light-truck wheels.
OperationSingle position bead loosening & changing
Wheel HandledSteel Car & Lt Truck
Mount DemountSeparate Tool
Tool head OffsetN/A
Table ShapeContoured
Wheel Clamping MethodCenter Cone
Height of Table to Floor28.5"
Bead Loosening SystemFoot controlled tower, up to 19" wide
Bead Lifting SystemTire Bar
Air Drive SystemPowered by dual chromed cylinders
Electric Drive SystemN/A
Inflation Pressure ControlLimiter
Assist Arms/ToolsNone
Wheel LiftNone
Clamping pressure limitedNone
ClampsN/A
Bead Seating Reservoir7.5 Gal. Tank
Inflation Gauge60 psi
Air Supply Gauge0-300psi
Water Filter/Lubricator or Oil InjectorNone
Storage TrayStandard
Inflation GuardN/A
Standard ProtectorsTool bar covers, mount and demount ends
Min / Max Rim Diameter10"-17.5" (car & light truck only)
Max. Rim Width19"
Max Tire Diameter38"
Rotation SpeedAir = Variable
Chassis Footprint53"w x 17.5"d x 42"h

Coats 9024E

  • Pneumatic drop center provides the power to hold run-flat and low-profile sidewalls in the drop center. Follows the bead as the tire mounts.
  • Tilt-back head is angled for no interference on second bead removal. Now tilts farther for more clearance.
  • High-torque electric turntable is rated at a full 2 HP. Works at controlled speed for easy tire removal and installation. Gives low-profile and run-flat beads time to relax, for less risk of tire damage.
  • Pressure limiter for inflation control and enhanced safety.
  • Power tapered roller allows easy bead and rim lubrication, plus assists in mounting run-flat and low-profile tires.
  • Pair of swing-in rollers re-loosen stubborn beads or provide lift support for wide and heavy tires.
  • Total rim protection package comes with clamp, lift tool and bead-loosener socks, plus Duckhead® booties and controlled rotation to protect the most expensive wheels.
  • Newly designed pedal guard helps prevent improper pedal selection.
  • Bead-loosener with new cam design ensures contact with wider wheels at the proper angle.
Operation1st loosen bead, 2nd mount/demount
Wheel HandledAlloy & Steel, Car & Lt Truck
Mount DemountTilt Back
Tool head OffsetAutomatic
Table ShapeX shaped
Wheel Clamping MethodFour clamps, air cylinder operated
Height of Table to Floor27"
Bead Loosening SystemFoot Controlled air cylinder
Bead Lifting SystemTire Bar 1st bead, roller second
Air Drive SystemN/A
Electric Drive System2HP Electric Motor, 110v, 60hz, 25amp (110-175psi, 5scfm required for cylinders)
Inflation Pressure ControlLimiter
Assist Arms/Tools4 Powered
Wheel LiftOptional
Clamping pressure limitedNone
ClampsFixed
Bead Seating Reservoir4.3 Gal. Tank
Inflation Gauge60 psi
Air Supply Gauge0-300psi
Water Filter/Lubricator or Oil InjectorFilter/Lube
Storage TrayPlastic tray on chassis
Inflation GuardN/A
Standard ProtectorsNylon head, steel head inserts, clamp beadloosener & tool covers
Min / Max Rim Diameter12"-24" external, 14"-26" internal (car & light truck only)
Max. Rim Width15"
Max Tire Diameter50"
Rotation Speed1 speed
Chassis Footprint65"w x 70"d x 89"h
Recommended Work Area7' x 7'

Coats ProGuard Leverless

  • Protective pedestal and center lock design locks the wheel into place at its strongest point, while protecting both conventional and reverse mount wheels.
  • Center mounting removes the table found on conventional tire changers, allowing access to the bottom bead by helper tools and bead-loosening rollers.
  • Built-in adjustable wheel lift places the tire on the pedestal with the push of a pedal, reducing operator fatigue.
  • Leverless Power Duckhead® replaces traditional tire tools that can mar wheel surfaces due to application difficulties or operator error. Changes even the toughest tires quickly and easily.
  • Bead-loosener disc and tower loosen the upper and lower beads with pinpoint accuracy from a single mounting position with easy-to-use controls.
  • Robo-Arm® helper device effortlessly keeps the top bead of even the most stubborn tires in the drop center during the mounting process.
  • User-friendly control pedals control all tire-changing processes from a single operator location.
Operation1 - loosen bead & mount/demount on the table
Wheel HandledAlloy & Steel, Car & Lt Truck
Mount DemountTilt Back
Tool head OffsetAutomatic
Table ShapeCentre Post
Wheel Clamping MethodCentre Lock Cone
Bead Loosening SystemRoller disc
Bead Lifting SystemLeverless
Air Drive SystemN/A
Electric Drive System220v, 1phase, 20amp (1-1.5HP) two speed
Inflation Pressure ControlLimiter
Assist Arms/Tools4 Powered
Wheel LiftStandard
Clamping pressure limitedN/A
ClampsN/A
Bead Seating ReservoirOptional (4.75 Gal.)
Inflation Gauge60 psi
Air Supply GaugeStandard
Water Filter/Lubricator or Oil InjectorFilter/Lube
Storage TrayMetal side cabinet
Inflation GuardN/A
Standard ProtectorsHead & Finger
Min / Max Rim Diameter10"-34"
Max. Rim Width16"
Max Tire Diameter47"
Rotation Speed2 Speeds
Chassis Footprint46"w x 77"d x 83"h
Recommended Work Area7' x 7'